Up next in 10
PreOrder the Anycubic Photon P1 Here (or Don't): https://geni.us/PhotonP1Preorder
**LIVE DISCUSSION – Anycubic P1 Pre-Order: FOMO Marketing, $10 Deposits & What You Should Know**
Tonight I’m diving into the Anycubic Photon P1 *pre-order frenzy* – and more specifically, the **$10 deposit scheme** that promises you a $449 price tag and "$350 off!".
This livestream is NOT a review of the printer (I can’t talk about performance yet).
Instead, we’re going to tear apart the **marketing strategy, pricing psychology, and risk factors** behind this launch – so you can decide if the $10 punt is worth it.
---
### 🧠 What we’ll cover
- The $10 deposit system: what you’re actually buying
- Is $449 really a $350 discount, or is the MSRP smoke and mirrors?
- Kickstarter as a pre-order funnel: why brands are doing this
- FOMO tactics: urgency, scarcity, “VIP benefits” and sunk-cost traps
- What happens if you change your mind after paying the $10
- PayPal buyer protection (US vs UK) and refund realities
- Risk vs reward: is this genuinely a smart punt?
Show More Show Less View Video Transcript
0:09
[Music]
0:16
[Music]
0:37
[Music]
0:42
Right, then. Hello. Hopefully everyone can hear me. Uh, you know, I'm not a
0:48
good streamer when I have to Oh, I've already done it wrong. There we go. You know, I'm not a good streamer when I
0:54
have to check my audio with people every time I come on stream, but here we are.
1:00
Hi guys, welcome. Uh there's a few more people here than I thought would be. Uh
1:06
this is a very impromptu live stream. I'm going to get to the point straight away. Um the Photon P1 uh any Cubix's
1:14
upcoming printer. Um I'm in a bit of a sticky sticky. No, that's that's
1:20
overdramatic. Um, there's a few things I want to cover about this pre-order and generally the marketing. So, if you
1:26
haven't followed my channel for a while, I tend to probably review printers less and winge about marketing more. Uh, but
1:33
the point is there's a few I'm constantly getting questioned by people uh, should I pre-order it? Should I
1:39
pre-order it? And I'm in a difficult situation because, as you can quite clearly see, I've I've got the printer.
1:44
The printer's sat over there, but because of NDAs, I'm not allowed to show it. I'm not allowed to give impressions.
1:50
I'm not allowed to talk about it, but I'm constantly getting the question of should I pre-order the Any Cubic Photon
1:58
P1? And the answer is probably yeah, you should pre-order it,
2:05
but that comes with a lot of caveats um that I think people should at least
2:12
be aware of. And it's mainly because in this day and age, I know how fast we
2:20
all are to pull the trigger on something. And I I'm in that boat as well. Like, in fact, you know what? I'm
2:27
saying it. Uh that was on a deal for Black Friday. I've wanted a new sander for ages and I went, "Oh my god, yeah,
2:32
I've I've got to do it." Now, in my case, it's a Milwaukee tool. So, of course, I definitely got a good thing
2:38
because we've got that brand history that we know it's going to be Milwaukee and it's awesome. So, here's the
2:45
situation. I have I'm under NDA. I can't give impressions of the printer. I can't talk about whether or not it's good,
2:51
bad, the quality, anything like that. That's not what this is about. This is about whether or not you should
2:57
pre-order it and what we can infer from the pre-order page alone because
3:03
to a to a point, I think where we're getting a little bit gas lit. So, thank
3:10
you for for being here, guys. Um, this is mainly for the people who watch this
3:15
later. Um, and my objections to how marketing misleads people, but [ __ ]
3:22
hell, like this is, yeah, this this is this is a bend. So,
3:28
already got a few questions. When will the NDA be removed? I can't say. I can't
3:34
say anything. I can't talk about that. But this already we're into a stream of I can't say this, I can't say this. But
3:41
let's get into the stuff that we can all infer from the information that's uh
3:47
been been given to us. So first of all, 10 pound $10, I might say pound
3:52
accidentally. Uh sorry guys, morning. I know it's it's early morning for a lot of people. Uh why are you still awake?
3:59
Um and David, are you waking up at 5:30 a.m. or you or have you not gone to bed
4:04
yet? Um, but yeah, so $10 pre-order.
4:09
What does that get you? Here's the thing. It's the best price
4:15
ever. Yep, totally get that. $350 off.
4:21
We'll come back to that. An exclusive gift. A $15 sitewide voucher. Priority global
4:30
shipping after the campaign ends. Right, let's break this down and tell you the
4:36
truth. Right, so if you pay $10 now, and I'll say up front, it's probably worth
4:42
the punt and despite what any cubic say, there's a good chance that you can get
4:48
that back if you decide to change your mind later. Um, but what I am going to say is since you paid this $10 and you
4:57
get priority shipping, we'll cover that in a minute. Um,
5:02
you don't then need to as soon as the campaign launches go and commit the rest
5:07
of your money on Kickstarter. You can wait right until the last hour of the last day and you still according to this
5:14
get that priority global shipping. So, I'm going to say wait for the reviews.
5:20
Um, so $350 off. I don't know where it says it. We'll go to the Q&A in a
5:25
minute, but that 799 is the RRP. In fact, let's just go go to
5:32
it. So, here's the features. And the reason for this video is because any cubic have said I'm not allowed to do a
5:38
review, but I am allowed to do one of those short videos
5:44
um where I can go, "Oh my god, features, features. This has features. Do you like features? This has got features." And I
5:50
can excite you into doing more FOMO. And that that's the bit where I'm like,
5:55
"Okay, so I'm not allowed to tell people what I think about it, but I am allowed to I'm not even allowed to do a preview,
6:03
a a here's what it is. I can do an unboxing. There's the box. It's over there. Um, I
6:10
can do an unboxing, but I'm not allowed to give any impressions or anything like that until the NDA date. Meanwhile, and
6:17
I get it. I I don't mean to to poo poo on other creators, but the reason for this is I woke up this morning. I do
6:23
what most people do. Got out of bed, opened up my phone, and there it was. Another
6:30
FOMO YouTube short from a creator who's like, "The P1 is here." Ah, wag. Yeah,
6:36
amazing. All of that stuff. And yeah, in all seriousness, I'm just kind of like,
6:44
is is this really Yeah. Is this really the right way to go? So, oh, hello. One
6:50
second.
6:55
Brilliant. Okay, so fair enough. Uh, sorry, I got a message from someone from any cubic as I was doing this and I was
7:02
concerned it was a, "Hey, we're watching your you doing a live stream. Please don't do this." Um, but yeah, so uh I'm
7:10
I'm sick and tired of the ah ah buy this now, buy this now, pre-order it now.
7:16
Now, to be fair, at this point, it is only a $10 pre-order. So, yeah, it's not
7:22
the worst thing in the world. Should you commit to that pre-order? I'll say tentatively, yeah, it's worth a punt and
7:29
I'll talk to you about um you can probably get it back if you change your mind anyway. But, uh yeah, so here we
7:35
go. So, it's got all this. Ignore the dual the dual VA. I can say that because
7:41
uh we know that from the form next video where they revealed it. This is what they're putting forward. Honestly, I
7:46
think that's a bit of a daft thing because if somebody comes along and sees this a dual VAT, why would I want a dual
7:52
VAT? It'll I think that'll this Yes, it has a use in very specific uh scenarios,
7:59
mainly dental. Um but I I genuinely don't think people are going to be
8:04
limiting the size of the bat. Like if I'm printing this thing, they've got in fact I'm You know what? I'm doing the
8:10
wrong thing. There we go. Let's swap round. If I'm printing this thing that
8:15
they show in the preview where it's one of those two color spinny things, uh, I'm probably printing as many of them as
8:22
I can to sell at shows. So, I'm going to be using the full plate to print as many of these white ones as possible and then
8:29
the full plate to print as many of these blue ones as possible. So other than dental maybe when apparently this
8:35
feature dual plate is hot in dental this isn't the right thing for promoting look
8:43
at this on the printer that is an optional add-on it is not the standard
8:49
uh the standard way of doing things. So, we've seen that from Form Next. I can say that the standard printer comes with
8:55
a normal plate. We saw at Form Next, it was a steel, a good high quality stainless steel plate, not this dual
9:02
aluminum vat. So, I think when people see this, it's going to put more people
9:07
off immediately and go, I don't want that. And walk away. Um, rather than rather than bring them in and realize
9:14
that actually, no, this is the standard here where you get it. So, let So, this pre-order again, I'm sick and tired of
9:21
seeing these pre-order, pre-order, pre-order because features, it's all about feeding the FOMO. And for anyone
9:26
who doesn't know what FOMO is, it's fear of missing out. It's that psychological trigger to spend money now, spend money
9:32
now, spend money now, give us, give us your $10, give us your $10. And that is
9:38
a level of marketing that I just vehemently
9:43
find incredibly frustrating. So, that's the bit I'm objecting to. Again, we're not going to cover my thoughts on the
9:50
printer here. I'm not allowed to do that, which take that for what you will,
9:56
and I'm not allowed to do that until the campaign starts. So, what is the price
10:01
of the Any Cubic Photon P1 with the deposit offer? The Any Cubic F on P1 is priced at £449 when you place a $10
10:09
deposit, which saves you £350. Now, the important £350.
10:14
And here's the important bit. Off the MSRP. I'm going to put this to the audience.
10:21
What does that mean? What does that mean? Tell us, guys.
10:27
Please tell me that you've watched this channel long enough to understand what that what I'm on about when I say $350
10:35
off the MSRP of 799. Correct. Paul Driver 2915. It means
10:42
booger all. It means absolutely booger all because if there's anything we know historically, it's that not once has any
10:48
cubic, in fact, I'm going to bring up their website, any cubic uh go to their website. Not once in the
10:56
history, maybe now is a bad time to do it, but if we go to 3D printers and resin printers, we can see it there. Not
11:03
once has a single printer they have ever sold been at the MSRP. All of them from
11:10
day one. So, the MSRP for the max is849. It's never been sold at 849. Never been
11:16
sold. Um, if you want to tip, guys, it's a super thanks, I believe. And that
11:22
should automatically thing. I really do appreciate it. So, yeah. So, already 799
11:29
and again, I don't know this by the way. So, I don't believe 799 will ever ever
11:36
be the price you pay for this machine.
11:41
As soon as it launches, it'll be $799 discounted to 649 or 699 or even even
11:47
less to inflate it. So, this means the $350 deposit is not uh the $10 deposit
11:53
is not getting you $350 off.
11:59
Sorry, I say means infer you are you're not going to see this launch on Kickstarter at $799 for everyone else. I
12:06
don't believe that for a second. So, this mo more than likely probably gets
12:12
you $50 off. 50 to 100. I don't know this. They haven't confirmed this.
12:19
Um, it means this free the same as does it say the free gift has a $100 value? I'll
12:26
check that in a minute. So, so already you're not saving $350, but it looks
12:32
big, doesn't it? These these are my things. Still think it's worth pay. I still think it's worth just throwing
12:38
that $10 at it. And if you do, by the way, there's a there's a link in the description of the video. Um, so this is
12:44
the thing, like I'm stuck because I'm like, yes, you may as well do it because
12:49
if you are considering this printer, it will get you a bigger discount. My argument is it's not giving you $350
12:58
off. And I think there's going to be a lot of people who don't know this, don't read this, don't see this video, who
13:05
when the Kickstarter goes live realize that, hang on a minute, I could have pre-ordered it for because they'll still
13:11
be early birds, I'll imagine. And they'll they'll realize that hang on a minute, I've only saved $40 or $50 or a
13:19
porch $100 from what they launch it out on Kickstarter. What are the benefits of placing the $10 deposit? By placing a
13:26
$10 deposit, you secure the P1 at $449, a $350 saving again off the MSRP, which
13:33
it'll never sell at. Uh, we don't believe. All of this is I'm inferring just so I don't get sued for for saying
13:39
it's fact, and I could be wrong. Uh, you'll receive an exclusive gift. We
13:45
don't know what it is. Uh, enjoy priority global shipping once the Kickstarter campaign ends. Right. Global
13:51
priority shipping is [ __ ] It's absolutely [ __ ] What global
13:56
priority shipping means is nothing because they're not going to send all of
14:02
your, let's say you're in the UK. Um, four 449 is a very no-brainer price for
14:08
the machine. No, they want to make money on it. They need to sell it for more after the pre-order. I'm not sure what
14:14
you're saying there. Phum is a very no-brainer price. If they want to make money on it, they need to sell it for
14:20
more after the pre-order. They're making money on it at 449. Don't don't think they're not.
14:28
I don't mean uh to be antagonistic with you, by the way. If I'm coming across as it's because again, I struggled to sleep
14:34
last night over this. Um uh so yeah, so this is why I'm here. So
14:41
the passion is coming out like at this campaign. It's not even at any cubic. It's it's my
14:47
my frustration with these marketing strategies in general. I don't like this trend that that companies have have
14:54
jumped on. So, and we've seen all this before. Uh yeah, we don't know what that is. Exclusive shipping is is bollocks.
15:01
If you live in the UK and you're ordering this, they will put this on the same shipping container with as many
15:06
other orders that are coming to the UK as possible, including any of their um
15:14
retail partners. and and they'll send it at the same time they send stocks to
15:19
global ware stock to global warehouses. There is a good chance that you'll see
15:24
people who haven't pre-ordered this and just buy it from the website potentially depending how it sells uh receive it
15:31
before you do as a backer. I'm not saying don't back it. Potentially they they might do the right thing and they
15:37
might go, "Okay, the these guys ordered it first, ship it straight to them from wherever before we ship any others or at
15:44
least first. But yeah, it it's it's rubbish.
15:49
When can I pay this deposit? From November 8th of December. Uh from November 8th to December 11th. Remember
15:56
that this is a limited time opportunity to secure the anyone any cubic P1 VIP
16:03
offer. So please place your deposit as soon as possible. There won't be a better price available on this. So
16:08
you've got nine days from including today. Yeah. So, uh, you don't need to
16:15
do it as soon as possible. You've got the next nine days to decide. Uh, think about it. Um, I'm not allowed to put out
16:23
my review until the Kickstarter starts. I'm not allowed to
16:30
do that. But yeah, remember remember pay by the 11th of December. Speaking of
16:36
Christmas, I haven't opened my advent calendar today. Um, do you I I realized that people in the US don't have them
16:41
when we had a US person join us. uh a company I used to work for and the company would give out an advent
16:46
calendar to everyone in the office uh for the first day of Christmas. And what these are for our American audience is
16:52
it it's like a board of chocolate like like yay big um like a thin board and
16:57
you get little windows and and there's one to 24 on there. Sometimes 25 is included with a big a big one and you
17:04
open one every day every morning you get a little bit of chocolate. We had an American person join us. Didn't know this. And uh they just sat there and
17:13
opened the door uh on day one and just did them in order. Thought it was a game. It was brilliant.
17:21
So I don't know if it's just not not Yeah. Dang it. Anyway, let's get back on with this. So from 8th of November till
17:28
December the 11th now. Yeah. So, I'm not allowed to release a review and tell you the actual impressions of the machine
17:35
until the Kickstarter starts. Now, here's a question. Why Why would they
17:41
continue the pre-orders after the Kickstarter started?
17:47
Yeah. Why? Why would they? They wouldn't, would they? Also, why would they stop the pre-orders
17:56
days before the Kickstarter starts? Yeah, why would they? They would want to
18:03
keep that momentum going. So, as for like I can't confirm when the NDA date
18:10
is and when the Kickstarter starts, but we can I'm sure we can infer something
18:16
from this, can't we? Is the deposit refundable after payment? Please note that the deposit is non-refundable once
18:24
the Kickstarter campaign goes live. Well, let's add it to cart.
18:29
Let's check out. Let's hope that my email address isn't publicly available on here because I'm not logged in. It's
18:34
not. Oh, look. I can pay with PayPal. So, what what that tells me is under my
18:42
consumer rights, if I pay with PayPal and I pre-order it,
18:47
if I place this pre-order and I get nothing, I can say to PayPal, hey, I got nothing. And I'll get my 10 $10
18:54
refunded. So, I say consumer rights, but it's it's PayPal's policy. And PayPal's
19:00
policy supersedes whatever crap any cubic are saying.
19:06
Sorry to say what you're saying is crap any cubic. I'm not trying to be rude to you. I I don't like this type of
19:12
marketing. So, uh there we go. So, the deposit is non-refundable.
19:20
I'd like to test that theory. I'm I'm sure many of you would. So this is why I'm saying I can't give impressions of
19:26
the printer. I can say from seeing it I can refer you to my video where I was at form next and at form next. I said then
19:34
this is promising based on that information you can take an inference as to whether or not it's
19:41
worth dropping this $10. And at the end of the day it's a $10 pre-order. Oh, how
19:47
come? Sorry. The reason it cost $20 in the checkout is because I'd already added it to cart. It'll now go to 30.
19:54
See? So, I've got three pre-orders. Good, good question.
20:01
So, yeah. So, there you go. Sorry about that. That was a a thing on me. Good, good question, though. Um, but again,
20:08
yeah. Um, uh, Wind Forward 9810 has just said, um, yeah, if you if if you order
20:15
it on a credit card, even if PayPal refused to refund it, um, just contact your credit card company and say, "I did
20:21
this. I got nothing. You'll get it back. Now, sorry, Any Cubic, if that is telling people how to game your system.
20:27
It's not. It's telling people their own consumer rights. If they didn't get anything from you after placing this
20:34
this $10 pre-order, then you can you can get your money back. And let's be fair,
20:40
you'll you're not going to fight people over $10. Um, so yeah. So, is it worth
20:45
it? I was impressed with it at Form Next. I can't give my updated impressions since it's $10 if you
20:54
consider. So, this is where it comes back to earlier. So, even though I'm saying all this, even though I'm saying all this and I'm anti this method of
21:01
FOMO sales, it's $10. Just pre-order it.
21:07
Worst case scenario, you'll get you'll get that back. If you're considering it, pre-order it, pre-order it. You're not
21:12
saving $350, but you are going to save more than if you don't. Yeah.
21:18
There we go. Now, on that refund, I've said I've said probably. We'll come on
21:24
to that. Uh, can I use one deposit to purchase multiple units? No. Each $10 deposit applies to one any cubic photon
21:32
P1. Uh, if you want multiple printers, simply place a separate $10 deposit uh
21:37
or each unit. It's that easy. So, as you can see, I've just done two, three, four, that sort of thing. Yeah. Again,
21:44
oh, Warhorns, you're spoiling it. You're spoiling it, mate. We're where We're You're too early. But yeah, Warhorns is
21:50
right. Uh, where can you purchase the Any Cubic F on P1? The P1 will be launched on Kickstarter in the coming
21:56
weeks. We'll be will be providing more details. Imagine how long it takes
22:01
me to get through reading a script when I do a proper video. Uh, any more details about the Any Cubic P1. If
22:06
you've got any questions, we encourage you to stay connected to our Facebook group uh for the latest update. So, I'm going
22:13
to open that in a new tab. In fact, copy link. Copy link address. There we go. Do
22:19
that. And then what I'm going to do just to be an ass is share. Uh, I'm going to join the group.
22:28
It won't let pages join. So, I have to do that. Join group.
22:36
And then I'm going to paste this video link. Uh, I'm now acting as me. and I
22:42
need to wait until my request's approved. So, there are currently
22:49
uh 1,246 members in that group, and I'm going to paste this video link to that group. So, at least the people who are
22:54
pre-ordering get a chance to see this, to go back um and and check this out later and go,
23:01
"Oh, actually, yeah, I I just want people to know what they're in for because I know this level of marketing,
23:07
this level of push, this level of, hey, get this now, get this now, get this now, and everyone jumping on the
23:14
bandwagon." And I mean, I was considering doing a short, which sarcastically takes the mick and goes, "Oh my god, wow, this has features just
23:21
so people have a chance to go, okay, what exactly am I getting? How much am I saving? And how much does it piss me off
23:29
that I'm being slightly misled?" Cuz we are. This is misleading at the worst. Is
23:35
it a scam? It's not a scam, but it's misleading. Anyway,
23:42
oh thank you C se word cword UK. I'm going to say word even though it's weird
23:48
UK and we all we all know what that means. Um but yeah, thank you for posting this video in the group so at
23:53
least people know. Um it's better when you guys do it because if I do it, it's self-promotion whereas if you do it um
24:00
it's it's making people aware. So thank you for the Facebook group and join that group. Uh, when will the Any Cubic
24:07
Photon be launched on Kickstarter? And this is where it's like the Any Cubic Photon P1 will be launched in mid
24:13
December. I wonder when.
24:21
And it's this. It's the It's the mystery they live. They leave. Oh, we're not telling you when. You best get your
24:27
pre-order in now. Okay.
24:32
Um, arm bending just it's shitty. It's shady tactics.
24:39
Oh, I love getting passionate on these streams. The P1 will be officially launched in mid December. In the coming
24:45
weeks, we'll be providing more details about the Any Cubic Fight on P1. If you have any questions, we encourage you to
24:50
stay connected with our Facebook group for the latest updates. Will I get a reminder for the Any Cubic Fight on P1
24:57
launch? Yes. After placing your $10 deposit, you'll receive email updates and reminders about kick about our
25:03
Kickstarter launch in December. Make sure you check your inbox and spam folder for notifications.
25:09
Why do I need to pay a deposit? Paying the $10 deposit here secures secures your exclusive deposit unit user
25:17
benefits. You'll be able to process the Any Cubic F on P1 printer machine only at 449 when the Kickstarter
25:25
campaign launches. H this VIP offer is available only for
25:30
deposit users and will not be offered once the Kickstarter project goes live.
25:35
So there we go. Hi every uh Hi everyone. Welcome if you've just joined. So again,
25:42
this is kind of a Yep. Okay. Paying um paying your deposit. You'll be able to
25:48
process the P1 printer machine only at 449 when it launches. But then they contradict that a bit later down. Now, I
25:55
don't know how this is going to work. I I and I I'm not sure that they know how it's going to work because I don't think
26:01
they've ever done it like this before. Um, but we'll we'll come back to this when we get to the next bit. Will paying
26:07
a deposit guarantee priority shipping? Yes. Woohoo. Get you excited again. Paying a
26:13
deposit ensures that you'll enjoy priority shipping. In addition, our any cubic P1 goes live on Kickstarter. The
26:19
earlier you place the order, the sooner you'll receive your product compared to other deposit holders who place their
26:25
orders later. Okay, I'm I'm going to take that with a
26:31
pinch of salt. I can't say they're wrong. Uh but I I I'm certain that
26:36
they're not going to ship a load of pre-order units before an entire crate
26:42
of warehouse stock. The whole point of this getting a pre-order in is for them to estimate sales, estimate interest, uh
26:49
get conversion rates, get your details, and that sort of thing. That's the benefit to them. That's why they're
26:54
paying what they're paying. And yeah, so that's it. Yeah, if you don't pre-order
27:00
it, uh Wireheads probably hit the nail on the head. If you don't pre-order it with this voucher, yeah, you'll probably
27:05
get it a couple of days, couple of weeks to a couple of months later. The thing with Kickstarters, they're wild. Some
27:11
regions will get them faster than others. They'll prioritize the bigger regions first.
27:17
So, yeah, but you will still get it. You will still get the earliest units at the
27:24
lowest prices. Um, local delivery is expected to begin
27:29
in February 2026. Typically, once the Kickstarter campaign ends and your payments are successfully processed, we
27:36
send out a survey to collect your shipping information and arrange delivery. for the latest updates on shipping, please stay tuned to our
27:42
Facebook group. So again, they'll give you updates on there. So it's a short window. We we can infer, we don't know,
27:49
we can infer when the Kickstarter campaign starts. Probably going to last
27:55
over till January if shipping's going to start in February. Um but again, this is
28:00
a Kickstarter campaign, guys. I can't say with any certainty um that they will miss this date, but
28:07
typically for Kickstarter campaigns, for Eastern companies, for 3D printers, I've
28:13
not seen a single one hit their dates yet, except maybe Snapmaker. I think they did well. Or am I wrong?
28:22
But again, you'll get it. You'll get it earlier. But but again, this is a Kickstarter ex take that with a pinch of
28:28
salt. you you probably are looking at the quarter one, but depending where you
28:34
live in the world and how long it takes them to ship the units, I can guarantee you guys these they're already building
28:41
these machines. They're already getting them ready and and shipping is probably already started. So, how can you lock in
28:49
the $350 discount with a 10 pound deposit? Again, $350 discount off the
28:56
MSRP. uh you can secure it uh by following these four simple steps. Pay the $10
29:02
deposit. Complete your order. So, this is the contradictory bit. After the official launch of the Any Cubic P1
29:08
after the launch of the P1, complete your order on Kickstarter at
29:16
the super early bird price and choose your preferred rewards and add-ons. So, this is the bit that's unclear. So after
29:22
the launch of the P1. So I'm reading that as it says it. When the P1
29:27
launches, as in not launches on Kickstarter, after the launch of the P1,
29:33
it may be like available to buy on the website, but it may be the launch of the P1 Kickstarter. Complete your order on
29:41
Kickstarter. Oh, at at the super early bird price and choose your preferred
29:46
rewards and add-ons. You have to choose the super early bird price.
29:53
So is that price? We're current Hang on. We're currently finalizing the super early bird price based on user survey
30:00
feedback. Has anybody here had a user survey?
30:05
Stay tuned to this page or our Facebook group. The official pricing will be announced soon. So this is already like
30:11
I'm confused by this. Receive a refund if you placed a deposit and you backed us on Kickstarter. We will process a
30:18
refund for the price difference between the Super Early Bird 449
30:24
deposit offer within 14 days after the campaign ends. Please make sure
30:30
Super early bird price. Oh, okay. Right. So, it sounds like what they're going to do is they're going to release this on
30:39
Kick they're going to launch it on Kickstarter. So, if you've pre-ordered, you will need to go to Kickstarter and
30:44
get it at the super early bird price. They don't know what the super early bird price is going to be.
30:52
Um uh that the we don't they haven't said what that super early bird price is
30:58
going to be. They haven't said if that super early bird price is going to be a limited number or if you have a limited
31:04
amount of time which I earlier inferred you'd have the whole campaign maybe to do it or are there a limited number of
31:13
super early birds? Don't know. But whatever that price is, you have to back it at that
31:21
and then when if you placed a deposit and backed
31:27
it, so you then pay that full early bird super early bird price and they refund
31:35
the difference between whatever that early bird price is going to be and the 449. Well, it
31:41
should be 439 because you've paid the $10 for the deposit as well. Otherwise,
31:47
you'd be paying $459 anyway. Yeah. So, within 14 days after,
31:54
so you need to pay the $10 deposit, you then need to pay the full amount for the
32:00
kick whatever the super early bird price is. Then they'll send you a refund 14 days later. Please make sure the email
32:06
address you used for the Kickstarter account is the same as the one you use to pay for the deposit. So, if you've
32:11
got multiple email addresses, there we go. So, Daryl, thank you ever so much for joining. Uh, don't forget guys, just
32:18
for covering um this bullshittery, you can uh pay a super thanks or even better
32:24
become a member and you get your name in likes at the end of uh all the videos we do as well. So, if you do want to ask me
32:29
a direct question, don't forget forget to put fauxhammer in the comments or chances are I won't see it. Uh, once the
32:37
campaign concludes, we'll send a survey to collect your shipping information. Yeah, that's all standard. How do I get
32:42
my VIP offer refund? So, this clarifies it. After the Kickstarter campaign ends, if you buy the Any Cubic F on P1, you'll
32:49
get an additional refund via Kickstarter, making your final price $449, which
32:55
again, I'm not clear whether or not that $10 deposit is also refunded or whether
33:02
you're paying the $10. So, the total you'll pay is $459, but again, it's $10.
33:09
Are we going to be upset about that? We might be upset about it if
33:16
the the difference between what we pay to pre-order it and what people actually
33:22
have to pay as super early birds is like really narrow. So, there we go.
33:29
Right. What should I do to make sure I get the refund to secure your $350 discount,
33:36
which it isn't. It's probably 50 to 100. I I hope it's at least 50 to 100. pay
33:43
the $10 deposit on the Any Cubic website to rever reserve your spot at the price of $449. Please note the $10 deposit is
33:50
non-refundable. Again, they've said that, but chances are you can you can if
33:56
you don't get anything um we'll talk about that in a minute, but
34:02
yeah, use the same email address you entered when paying the deposit uh to register on Kickstarter. Definitely, if
34:07
you're going to pay for the deposit, definitely do that, guys. is make sure you've got a Kickstarter account with the same email address that you use on
34:14
your Any Cubic account. Um, I know people make different addresses, but just do it because otherwise trying to
34:22
contact them to sort this out is going to be a nightmare. Uh, you purchase the Any Cubic Fight on P1 on Kickstart and
34:29
after the campaign launches using that same email after the C campaign ends will cross match your deposit email with
34:36
your Kickstarter order email. If both matched, you'll receive a refund within 14 days. They haven't told you what you
34:42
can do if you don't have matching emails because they don't because it'll they'll have to then do it manually. They'll
34:48
have to piss about you'll have to piss about. Um, so they haven't told you. I I think that's fair. It like I'm not going
34:55
to critique them for that. They want to discourage people not doing that. What happens if I miss the Kickstarter
35:01
campaign after paying my deposit before we launch? which will notify you via email and our Facebook groups about how
35:07
to place your order and secure the final discounted price of $350 off MSRP, not
35:14
off the price they're doing they're going to sell it for on the Kickstarter, which we don't know what that is yet. However, if you still end up missing the
35:21
campaign, please note that $10 deposit is non-refundable. Even so, we want to
35:26
make sure you still enjoy your exclusive deposit holder benefits. So, you will receive a $15 voucher as a thank you for
35:33
your early support. This voucher can be used sitewide on Any Cubic's official store for future purchases, including
35:39
resins, accessories, and more. So, honestly, you you if you're already invested in the Any Cubic ecosystem, I
35:47
would immediately get this just to get a free five. Like, you're paying $10 to
35:53
get $15. It's free money. So, if you ever think you're going to buy from any cubic, get it. pre-order it um at the
36:02
very least. And I think you do get a $15 voucher anyway. Uh does it say that? Let me just control F1 15. Oh, wrong window.
36:10
15. Uh no, you don't. Uh no. Two, three. Uh
36:16
oh, yeah, you do. Yeah. So, you get a $15 sitewide voucher no matter what. So,
36:22
yeah. So, the chances are you they'll refund. So, when we were talking earlier about how they're going to do the thing,
36:28
you pay the $10 voucher. This is what I think. You pay Exactly. $10 is not that
36:33
much at all. Um, why do I think they're doing this offer? Because they want to
36:39
use they want to use this information, how many people pre-order as a
36:46
as an indicator as to how many of these machines they need to produce. That's
36:52
why they want it. But yeah, um so yeah, so the way I think this is going to work
36:58
is you pay the $10 here. You you then have to get the super early bird um
37:04
order, which I think for some people who are busy, have jobs, might miss out on
37:10
even if you've got the $10 deposit, they'll then have to figure out or go, "Oh god, yeah, we didn't realize this.
37:15
It's been so popular. We didn't realize that the super early bird would sell out. Sorry about those people who pre-ordered." Um, and then they might
37:22
open up a load more super early birds after people have paid higher amounts um, because they missed the super early
37:27
bird. I've seen this so many times on Kickstarter. Um, and then the price will fluctuate like this what you can get it
37:33
for. That'll piss more people off because they pre-ordered it earlier but didn't get the super early bird. Then
37:38
they'll open up more super early birds so that the people with the campaigns can do that or they'll just go, "Oh,
37:44
it's fine. Pre-order it at any amount and we'll refund you." So, after the campaign ends, you will you won't get
37:52
your $10 back in the refund. You'll get refunded from what you paid. And yes, you'll have to pay the full amount you
37:57
backed it at. You'll get discounted down to $449 for the machine price. And you
38:05
get a $15 voucher to use on any Cubix's website. Might have a time limit on it. Don't know. Uh but you'll get a $15
38:12
voucher to use on any Cubix's website, which covers the $10 you $10 you paid and you get $5 back. So, so like I said
38:20
at the beginning, is it worth backing? Yes. Cuz if you ever do think you're going to get anything from
38:28
any cubic, maybe resins, maybe filament, maybe something like that, you're getting
38:33
you're getting $5 for free. Um, the impressions I got of the machine at uh
38:40
Form Next tell me that it's worth a $10 punt. I if I had seen what I'd seen at
38:46
form next and then gone, oh, should I support this? Uh, I would I would throw
38:52
the $10 at this for the chance. But then I would 100%
38:58
watch reviews. Yeah, it's clear as mud. And this is the thing, Rob. This is where they want to get you. They don't
39:05
want you reading this. This is a lot of words. This is why I've done this video, just to be a buyer be be aware. not
39:13
buyer beware, buyer be aware um very specifically because I don't like this
39:21
type of marketing. I don't and I also don't like uh where is it and I can say
39:27
this because again we discussed it at form next and I have evidence of the discussion. It's in my form next video.
39:33
What I can't talk about is anything that wasn't in my form next video. And there were some questions that I've had since
39:39
that I should have asked then, but now because of NDA, I can't talk about it. But let me
39:46
go down. Uh where is it? Where is it? Where is it? Where is it? Where is it?
39:53
Oh man, maybe they've changed it. I did raise this uh yesterday actually. There we go.
40:01
There we go. So, if anyone's seen my form next video,
40:07
um, I had a, this is the weird, I had a discussion before I did that video. I had like a half an hour, 30 minute
40:14
discussion via Shintter, who was the lady in the video talking about the P1. Um, speaking with Bill, who is the
40:21
product manager. Um, and we discussed autoleveling, and Bill was like, "No, no, no, no, no, no, no, no, no. It's not
40:27
autoleveling. It's not autoleveling. Not at all." Uh, have I disconnected from the
40:34
internet at all? Because uh my video is
40:39
struggling. Bear with me. I just need to refresh my screen. Nope, it just it just hung. Um, but yeah, so he was like, "No,
40:46
no, no. It's not autoleveling. It's is assisted leveling. It's Sorry, I I did the way he said it then. Um, it's
40:53
assisted leveling." So, uh, the plate goes down. The force sensors here, you can see it on screen. Uh the it says
40:59
there it's assisted leveling. Like watch this video assisted leveling. So it it
41:06
doesn't level itself like they show here. These springs and this force sensor that appears tells
41:12
you you need to turn certain certain things.
41:18
Um yeah, it it's mad. So that that annoys me because the people who made it
41:25
are telling us that it's not autoleveling, but the people who are
41:30
marketing it are telling us it's autoleveling. There's no such thing as autoleveling. I don't have a problem
41:36
with the technology. I have a problem with the name. It suggests it level levels itself. It is not autoleing.
41:43
Autoleveling is not a thing. There are springs. You can see them here. There are springs under the screen. So if you
41:51
think about it, right, I've I've done this many times on many videos, but it's very hard to describe. So here is my
41:57
screen. Here is my plate. My plate is at an angle. So as I push down, instead of
42:04
the plate leveling to be parallel to the screen, what it does is it pushes down on these springs. Let me go bigger.
42:13
I'm tiny. Hello. You've got full face me plate uh
42:18
screen plate. So if I tilt my hand like that as the plate goes down auto
42:24
leveling would be it automatically orients the plate to be parallel to the screen. It doesn't do that. No printer
42:30
does that. So it comes down like this and then it pushes down on the springs
42:36
and as you can see my bottom hand moving it pushes the screen down. That is what
42:41
all the printers up till this point have done. Assisted leveling means before a print it goes your plate's not level and
42:47
it tells you how much to adjust the corners to to basically get this plate
42:53
level. That's what all that's what assisted leveling is. It uses sensors to inform you how to get it level. That's
43:00
what this is. Okay. Once it's level, it's it's more fine. But again, you've still got springs, which is another
43:07
thing. So, and and again, I can't give impressions of this machine, but we've
43:12
had springs in printers before. Yeah. Anyway, so so it doesn't do that.
43:19
So, imagine it. So, first layer pushes down. It pushes the springs down to there. And then as soon as it lifts up,
43:26
guess what? The springs push the screen back to there. And then it pushes down again. And it does that. And it can that
43:31
can give you unevil uneven prints because it might be thinner on one side than the other. I'm doing this enough.
43:38
So, yeah. Uh, Phom89 says, "As a new guy to resin printing, why people want to make leveling auto? I mean, it's good
43:44
marketing, but manual leveling is such it's an easy fast thing to do. Uh, and it's it doesn't need a PhD in rocket
43:51
science." Yeah, it it generally is very easy to do. Um, yeah, Saturn and the
43:57
Saturn has this problem as well. The Saturn 4 has that pain in the ass stupid plate. The Saturn 4 is worse because
44:03
it's got those springs in the plate, but it's got
44:10
I clicked the wrong thing. It's got that big gap. So, you get resin in there and then you've got to get it out. Whereas
44:15
something like the uniformation and uh nicely the Sat the Jupiter 2 has that
44:21
big block more like a form labs. It's a block with a flat plate. You're not going to get resin on top. They're the best plates I you can get. They're
44:28
brilliant. Everybody should copy uniformation in regard to plate design.
44:33
Um, this is not autoleveling. There is no such thing as autoleveling on any
44:39
printer I have ever used. It's assisted leveling and it's a good feature. It's a
44:44
good feature. It's the bullshittery that I have a problem with and I always have
44:50
passionately. So, moving down. Just finishing this off. How can I contact you if you've got
44:56
any more questions? We'll get back to you in 48 hours probably with a uh if you contact the support center that
45:02
response will probably be a we've received your thing. You can also reach us on our Facebook group the following link. But again if you go on most
45:08
Facebook groups any cubic aren't really uh responding to many questions or
45:14
clearies or anything like that which would be good for them to do um and get
45:19
involved in the community. This is what successful companies do. Look at Snapmaker. The reason Snapmaker is so
45:25
successful, a big portion of that is uh an American or Canadian guy named Blaine
45:30
who I believe lives in China and because he understands the market and can speak
45:35
the way the western world speak in terms of intonation. Uh they he understands
45:41
what we want to do. He feeds back the right way. Uh that's that's the best way
45:46
to promote something. He's done so well. So they are responding a lot on their
45:52
Facebook group. Hands up then. Sorry. Um I don't mean to accuse them of doing that. Uh typically is what I meant. So
45:59
uh Frenzy I3D printing. Uh good. Thank you for calling me out on that. I would rather be right and I'm happy to accept
46:06
and hold my hands up when I'm wrong. I'm not here to dissuade anyone. I think
46:11
everybody who's consider who's even considering this, even more people than those who are considering it because so
46:18
many people will have been put off by the why would I want a printer with a dual build plate. it. It's not a dual
46:23
build plate. This gets your attention, but that's not what it is. This is what
46:28
it is. They've told us that at Form Next. This is what you get is a machine
46:34
with a normal build plate. They've also shown us another optional build plate.
46:40
And this is a good build plate. I do like that build plate in terms of quality, but this I think people have
46:47
looked at that and gone, "Two beds, that's stupid. I don't want that." And turned away. So, yes. Should you pre-order it? Yes. Yes, you should
46:54
because the worst the worst you can get, the worst thing
47:01
that'll happen is you'll get a $15 voucher. Brilliant. It is worth doing, but they
47:08
don't need all of this. They're pushing for it. And the the
47:14
thing that I don't get is the whole point of this is so that they can get pre-orders in. So they can gauge
47:19
interest and once they've gauged interest
47:25
from that they can infer okay well this is how many units we need to run through
47:30
production. Okay fantastic. Um
47:35
that that is good for them. But if they
47:42
do this type of marketing, their numbers are going to be off because once people realize
47:50
what this is, that could change their mind because at the end of the day, you can back on
47:56
Kickstarter and at any point during the campaign, you can pull your pledge. At
48:01
any point, you can pull your pledge. You can even back it on a card that will
48:06
likely decline. Like I I've done this before. Like I've backed campaigns
48:12
on a card that I like I've got Monzo. So I put all my money in pots. So I don't
48:19
have $500 sat in the body of my account at any one time. So if anyone steals my
48:25
card, the most they're going to get off me is about 30 40 quid. So, when a
48:31
campaign ended that I forgot about um didn't realize it was going to be that soon, uh they tried to take the money
48:37
and I just went, "Oh crap. Yeah, I forgot about that. I don't really want it anymore." And canceled it then. So, yeah.
48:45
But yeah, maybe the Superbird offer is not that number limited. Maybe. Maybe.
48:52
Um I've never seen that. Like the whole point is they put it on quickly and they do that whole thing where it's like only
48:57
50 of these to go.
49:03
Um but yeah, so this is more of a I just
49:09
want to make sure people know what they're getting. I'm rather than jump on
49:14
the oh wow wow wow it's it's features features features because nobody knows
49:20
what these features do that nobody knows how it performs it's a very impressive looking machine from form next the
49:27
prints on it very impressive printed by them and done that if you're even
49:32
considering it. Yes. Yes. This is this is a $10 pre-order to get you a
49:39
discounted price. Just don't be pissed off when you realize you're not getting
49:45
$350 off. You're not. You're probably not getting
49:51
priority global shipping. And I want to have a look for this gift as well. Somebody
49:57
said it was like a $100 gift. An exclusive gift. Exclusive gift. Exclusive. All it says is gift. Somebody
50:04
inferred in the chat that it was a $100 gift. Um, what that gift will be is
50:11
something they've got lying around in the warehouse. Maybe maybe a pen or a or a a hat. I'd like it if it was a hat.
50:19
Um, uh, Michael Turner 5359 says, "I was looking at the Snapmaker versus P2S
50:27
combo. If drying filament is so important, why does Snapmaker put the reels external and exposed? Will this be
50:33
an issue over time?" um they do it because they didn't have a solution to not do it. Um and will it be an issue
50:41
over time? Yes, it will. Uh depending on your environment, uh PLA will absorb moisture. Uh I've
50:48
already had it. Mine's been sat down there uh with a filament reel on it that I haven't used in a couple of weeks. Uh
50:55
and when I came to uh extract it the other day, um yeah, when I came to
51:01
extract it the other day, uh and pull it off, it snapped because it had become brittle because it had been out in the
51:07
air uh and moisture. There are solutions. You can um just get uh any um
51:13
any cubic uh not any cubic snap maker themselves have got like a filament storage box and a dryer. Um there are
51:20
third party solutions that you can get that replace. You don't need to use the reels. I shouldn't do that. Uh the reels
51:27
on the side. You can just put it in any box. But yeah. Um wire ahead. Uh
51:32
longtime viewer has said uh it's a coupon for $100 off your next any cubic
51:38
printer. Is that a joke or or is that what it is? But yeah. Uh do you mean the next any
51:44
cubic printer? the one that you have to replace when they realize the issues with this one and therefore have to do a
51:51
new one sooner. Yeah. Uh just bought a Saturn 4 16K on the last Black Friday
51:58
stream and already a new machine. No, you 16K is a good machine. Oh, it was a
52:04
joke. All right. Yeah, it makes sense. But yeah, that Yeah, so I was right. We are we are on the on the same
52:10
wavelength. So but yeah, so that's it.
52:18
So yeah, so it was more of a please just be aware and I know I'll get people in the comments of this video going, "Yeah,
52:23
I already knew that. I read it." But I also know that there are going to be many people probably who don't comment
52:29
who will watch this and go, "Oh, right. Okay, wasn't aware of that or maybe
52:34
wasn't quite sure." So, I just want to make sure nobody is disappointed or as few people as possible are disappointed
52:41
on the day this Kickstarter campaign starts, which we certainly don't know when that's going to be. Um, when all of
52:49
a sudden they're seeing an early bird Kickstarter for 479.
52:56
I'm I'm being flippant, but I I'm worried I'm not wrong. Um, and as for,
53:01
you know, they're doing surveys. I'd love to know who they're surveying. I'd love Is there anyone here or anybody
53:09
who's watching who has been surveyed to get the price?
53:14
Um, I'm trying to think, have I been surveyed? I've definitely done an any
53:20
cubic survey, but not about this. So, yeah.
53:25
Thanks, David. Really appreciate it. So, that's it, guys. It was It was Hopefully this is short and sweet for me. It's
53:31
short and sweet. Anyway, I don't know how long we've been live for. Um, probably about an hour or something like
53:37
that. Yeah, probably about an hour. So, there we go. Oh, there might have been one on Reddit.
53:43
Fair enough. Fair enough. But yeah, so this is very inflated. Please be aware
53:49
it's inflated. Don't be disappointed when it goes live and all of a sudden
53:55
you you haven't quite got the saving that you were led to believe.
54:02
That's it. Before I go, does anybody have any questions? Don't forget to put faux hammer in the comment if you've got
54:07
any questions. It can be about this. It can be about any printer. If you're still after printer buying advice, what
54:13
is good? What is bad? I obviously can't talk about what I think about this. But yeah. Um, anything else? Um, and as for
54:22
when my video goes live, my video goes live when the campaign starts.
54:28
You're going to have to have watched this video to understand when that might be. Uh, which one would I choose, a 14K
54:34
screen or a 16K screen, but with slightly smaller build volume? Uh, Resin Monkey Studio. That is a very easy
54:41
question. Depending on the printer, because some printers with 14K screens are just bad or bad, have bad release
54:48
films. I would e, if we're just talking about the panel, forget the printer. I would easily choose the 14K panel over
54:55
the 16K panel. any day. Uh, am I interested in testing the mechanical
55:00
properties of 385 versus 405 nanometer? I have at work the possibilities if you
55:06
want to. Um, I I don't even know what I'd do. Maybe
55:12
no Maybe that's one for noisy works. I would like to know how to test the mechanical properties. So maybe um drop
55:19
me a line. Uh if you go to my homepage, go to about I've got an email address there. I'd love to know how I could do
55:27
that. Um, but there we go. Uh, frenzy I3 I 3D printing. How do I feel about
55:35
textured screens? Nice one. Um, that's a very good question because
55:41
obviously I can't talk about the P1, but I have used a textured screen on the form 4. Um, from what I understand, uh,
55:50
it's difficult to infer, and I'm going to be talking about the form 4 here and my experience. Um, I understand that
55:57
that texture allows, uh, stops the vacuum forming between the release film
56:02
and the LCD. So, um, so because of that, you should be a when
56:09
the plate lifts, it reduces peel forces. You should be able to lift faster.
56:14
genuinely the the form 4 was one of the was very average in terms of speed using
56:20
the materials I used. Um but
56:26
so I I didn't really see a massive speed increase. Reducing peel forces also
56:31
allows us to use fewer supports but the majority of people aren't supporting their own models. They're using auto
56:36
supports and auto support algorithms are all built around not having that reduced
56:43
peel force. So you get no benefit there. Um what I I don't know whether the textured
56:51
screen directly has an impact on the
56:57
accuracy of a print or the sharpness of a print because I've only used a form 4 with a
57:05
textured screen other than this which I can't talk about. Um, and I couldn't
57:11
compare that print to a similar print of a similar quality machine, a similar
57:18
resolution machine, um, to infer that the the texture has any
57:25
accuracy or offset. What I can tell you is watch J3D's tech video on screen
57:32
protectors. Screen protectors do have an impact on
57:38
uh the accuracy of a print. If you go back to the original um Frozen Sonic
57:44
Mini 8K, the original, not the S, which now has a screen protector, you can see
57:50
how sharp it is. The original didn't have a screen protector. It is ridiculously sharp. That's why you get
57:57
the better accuracy from the Sonic Mini 8K,
58:02
not the S, than any other printer because as soon as you add a screen protector,
58:09
then it it starts to have an impact on the light. If you add a glass screen protector, that has the least impact. If
58:15
you add a crappy plastic one that's slightly frosted, that has the worst. The same with ACF. If you add ACF, which
58:21
is very frosty, that has an impact. And then finally, you've got these wavy
58:27
screens. If you can follow the trend, you can infer from that what the result
58:33
is. Does that answer your question? Frenzy 3D printing.
58:39
Uh, can I recommend any air purifiers? Yes, I can. Before you buy this and and
58:44
this is as of yesterday, um, please click my link in the description of this
58:50
video, but I'm going to go back to here. And I'm going to point out this, which I
58:58
didn't know existed. Where is it? Uh, where is it? Where is it? Okay, it's
59:04
not on the website. Where? This is what we needed for ages.
59:11
Uh, adapter air. Where is it? Why can't I find it? There. Airpure 2.0.
59:20
Why can't I find it? Oh, there it is. Bloody hell, that was hard. So,
59:28
this is basically, so for the M5 series, we had like that proprietary socket. Um,
59:35
and what you get here is I love how they've named it, inlet hose, main part.
59:40
Main part. I love it. Exhaust hose. So, what this is is this is a hose that connects to the Any Cubic machines. Uh,
59:49
and and it's a proprietary locking nozzle that goes in and twists uh that then connects to the main part. [ __ ]
59:57
hell, the fan. And then the fan gets exhausted outside either through a window. You don't get a window adapter,
1:00:03
but any any window adapter will do. Obviously, you also want to be keeping your resin printers away from windows.
1:00:10
So, figure that out. Ideally, you've got a hole in your wall like I now have, which I don't think you can see cuz it's
1:00:16
behind that terminator, but um I now I've got three places in this room. One up there, one here for my extractor, and
1:00:23
one down there where my studio uh pres presentation desk is where I can vent outside directly. But this is that and
1:00:30
it's an inline fan that that pumps the fumes and heat straight outside. So, this is a really good one. Uh there's a
1:00:38
set for different machines. I I don't know what the different sets are because
1:00:43
they're all the same price and other than the hose itself. But if we have a look at
1:00:48
Sorry, this might be loud. Um
1:00:54
AirPod 2.0. You could also just stick your printer in a grow tent. I've got a
1:01:00
video on that. Uh right, this might get loud a second, but I will mute it as soon as I can. Nope, it's already muted.
1:01:06
So, if we have a look at the AirPure 2.0, if you Google it, um I am getting
1:01:11
one of these. I'm not doing a video about it. I was going to get it in this video, but it's too late now. Um there
1:01:17
you go. So, that's that's the device. You've got this here. Um very simple. Uh
1:01:22
attach one end attach it to a hole in your wall next to a window. But yeah, um
1:01:28
there you go. So, M series M7 series has got a direct connection. It just I've
1:01:33
done it again. Hang on. swap over. There we go. So, that's got a
1:01:39
direct connection where it goes in and locks in there, which is really good. Um, we've seen the
1:01:46
same if you have a look on my video, you you get the same uh hose on the on the
1:01:51
P1 as well. Uh here, look for the Mono 4 series, there's I mean, this looks
1:01:57
nasty, but there is a printable extension and the same, it works uh
1:02:02
here, there's a printable extension. It works with the S series as well. The newer printers are obviously getting
1:02:08
these built in. And here a third party printer. I'm pretty sure that's a Saturn
1:02:13
4 Ultra. Um there's even an adapter for machines with pre-drilled holes, which
1:02:19
isn't just the Saturn 4 Ultra, but you can get that adapter there and then lock it in there. So, that I think is a very,
1:02:26
very good extractor. And if you pay, here's the beauty is if you buy that
1:02:31
pre-order uh through uh spend $10 on this, you can
1:02:37
get $5 off that. Hey, if you're happy to wait. So, there we go. Uh moving on. Uh
1:02:45
as an FDM person, uh this is Ali TWQ8Q. Uh as an FDM person who doesn't print
1:02:52
miniatures or custom key caps, what are some other uses for resin printers? Are
1:02:57
resins getting strong enough for mechanical and practical prints? So yeah, Alli, um we've actually just
1:03:04
entered uh that realm now with printers like the with consumer more consumer
1:03:10
grade printers like the uh god, my brain's gone. Like the Reflex
1:03:16
2, which is specifically made for more uh more industrial grade materials with
1:03:22
actual strength. I've not got it anymore, but if you check out my Reflex 2 video, um I have a material on there I
1:03:29
I cannot break it. I can't bend it. I can't fl It's hard. I couldn't smash it with a hammer. Um and I made like a pipe
1:03:36
holder and I made a carabiner. Um and these are incredibly strong. Incredibly
1:03:41
strong. Um so they do have um some decent mechanical value. Um, it's more
1:03:47
the materials than the printer. But you do need a printer that is capable,
1:03:53
strong enough to withstand the forces applied because a lot of those materials
1:03:58
are very I always say viscous, but I don't know if more viscous is more fluid or more viscous is less fluid. Uh, so
1:04:05
we'll just say more or less fluid. Um, but yeah, like really thick tarlike materials. So if you're after that, um,
1:04:13
have a look at something like a reflex 2. um it it's a bit printer. You can still print those on consumer grade
1:04:19
machines, but you might have a lot more struggle because the the power of the
1:04:24
motors and things could struggle uh with both compressing the the resin as thin
1:04:30
as it needs to be, but also uh pulling the resin. Uh Michael Turner says,
1:04:35
"Thanks for your advice. I'm leaning towards a P2S combo. As much as I hate waste, I think as a beginner FDM
1:04:41
printer, I'll print more mono color and use the AMS for material types, not color. Yeah, and you've hit the nail on
1:04:47
the head for lot for a lot of people there. Um, it is the next year is going
1:04:53
to be very much about color. I think we're going to see a boom in material changes and then I think people are
1:04:59
probably going to slowly realize that well, one of two things. are either going to realize I'm not going to do that. Or because more material changes
1:05:07
are on the market, we're going to get more people going, "Oh, I can now make
1:05:13
models with with four, six, and eight colors in mind because more people are likely to print them." So, there we go.
1:05:19
Um, is it possible to pre-order outside of the US because changing the reason region removes the page and the item in
1:05:24
the shopping cart? Yeah. So, no. That that's the weird thing. The only storefront you can pre-order this on is
1:05:32
their US storefront. You can't pre-order it outside of the US storefront, but it
1:05:38
it doesn't matter. You're you're still getting because the the Kickstarter price is still going to be uh primarily
1:05:45
in dollars and you will get that much off. So, your voucher is in dollars, $4,
1:05:52
and then when you get your refund, it'll be your uh your local equivalent of wherever you
1:05:59
are in the world. So, yeah, no matter where you are, you do need to pre-order
1:06:04
uh this. You need to do the $10 deposit in dollars, but yeah, I I suspect you'll
1:06:10
get the right amount back locally. Um, have you fit an MVHR or me? Yes, I have.
1:06:16
I now have an MVHR as well. Uh, so since he was here doing an MVHR, I figured
1:06:21
drill two more holes. I already had one. Drill two more holes in my wall, please. Um, we'll go from there. So, you can see
1:06:27
No, that side. See this thing here? Uh, this black thing that's on my back wall.
1:06:33
That is my just an inline fan um for like a hydroponics grow tent. Uh, and
1:06:39
that goes straight to my old hole outside the wall. Uh, here. Let me see if I can get my finger in the right
1:06:45
place. So, you see where Terminator guy is just above the wall. He's you've got that gray pipe. That gray pipe is the
1:06:52
second hole in the wall. And then down there, which I can't show you because it's got the P1 on it, um, is there. But
1:06:58
yeah, so also behind the P1 box, I don't know if you can see that on
1:07:04
camera, you can. There is my MVHR with
1:07:10
the vent coming out down here and then just out there. So it takes bad air out there, captures the heat, transfers the
1:07:17
heat to fresh air, and brings fresh air in down here. So the reason the fresh air in comes in down here is because
1:07:24
I've got a door there. So it blows straight into the house. So when I'm not printing, doing anything like that, I
1:07:30
get fresh outside air to a small degree pumping into my house with I've got a
1:07:36
air conditioning system up there which keeps it hot and cool. That also encourages blowing the air in that
1:07:42
direction. So I get a lot more fresh air in the room. So yes, uh I've got local extraction for the machines now. And I
1:07:49
also have the MVHR which gives me fresh air. It does uh three to five on
1:07:55
standard. It does three air changes an hour and it's running at like 17% but I can also run a purge um which runs it at
1:08:03
50% or max uh which is like 100% which is like seven air changes an hour. So, I
1:08:10
feel a lot more safer in my room. Now, uh Wirehead says, "Bit off topic, but uh
1:08:16
a tip for UV curing stations. If you place a layer of emergency blanket
1:08:22
inside the lid, you cut curing time by a third." Emergency blanket as in like the
1:08:30
aluminium blanket. Oh, so place it in. Yeah. So, yeah. So, place a layer of
1:08:36
that. So, basically aluminium tape does the same thing, doesn't it? Anything reflective on the inside of the lid on
1:08:41
those curing stations that have got the liftoff lids, um, anything that reflects the light around more, uh, yeah, will
1:08:47
will help curing. Um,
1:08:53
uh, correct. Uh, Paul Norman, I don't know
1:08:58
if this was to me, but I read it. You pay $10 to any cubic then an unknown
1:09:03
price to Kickstarter and any cubic refunds the difference. Is that correct?
1:09:09
As Kickstarter could charge $800 kick Well, yes, they could charge $800, but
1:09:15
again, there's We doubt it's $800. We doubt it's ever going to be $800, which
1:09:20
is potentially a fantastic price for what this machine could turn out to be.
1:09:26
But um if it's lower than than the 800 they're they're saying. But again, it's
1:09:34
a discount down from an arbitrary amount. When it goes live on Kickstarter, I significantly doubt it's
1:09:42
going to be anywhere near $799. So you're paying them $50. you're paying them $10 to get probably
1:09:50
50 to 100 I hope at least $50 to $100 off and then
1:09:56
um but then yeah you do need to pay for whatever you paid Kickstart whatever you
1:10:01
backed it out on Kickstarter and 14 days after the campaign ends which will
1:10:07
presume is is end of December early January um you know when you're busy and
1:10:12
and will probably forget you backed it um will presume Boom. 14 days after
1:10:17
that, you'll you'll get a refund because you had your um your pre-order. But
1:10:24
again, $10 is is you're going to get $5 back. And and that air pure we talked about is good. So, why not? It's $10.
1:10:32
It's $10. You've lost Everybody watching this has lost $10
1:10:38
on on much worse. So, do it. So, I know I've come on this stream going, "This is
1:10:44
all shit." but still do it. I'd rather people just do it for the right reasons,
1:10:50
the informed reasons than all of this [ __ ] drama and bullshittery. I just
1:10:57
wish I hate FOMO. I absolutely hate FOMO.
1:11:02
People give Warhammer a bad name for FOMO, but come on. This is this is evil.
1:11:10
Evil. This is evil, right? This is just horrible. Horrible. Thanks, Ron. Really?
1:11:17
Uh, sorry, Rob. Thanks, Rob. Uh, thanks for the advice and reviews. Look forward to P1 review mid December. Yep, mid
1:11:25
December. We don't know when cuz any cubic haven't gone and told us. Uh, is
1:11:30
it possible that colored resin colors will become commonplace or have I missed a point? Folks that don't do minis,
1:11:37
etc., and just and thus not airbrushing. There's a couple of things. I actually if you check um my channel I've done a
1:11:44
video on uh Prusser who make color prints and I believe Hegy has also made
1:11:49
uh color uh sorry colored resins so you can get a variety of colors and even mix
1:11:54
your own. Um so I've actually done a video on that from Prusser uh that's
1:12:00
worth following. So those are available. Uh, but yeah, if you're wanting to do
1:12:05
specifically colored prints in very specific colors, then that's worth checking out. I just it it really isn't
1:12:12
like people I think the majority of people or at least the people in my audience, the majority of people paint
1:12:18
their their prints. I was speaking to somebody last night who runs a business who's looking to get prints that they'll
1:12:24
use for manufacturing um actual physical uh parts and and and
1:12:31
things. and even they print and finish them. So, yeah. Uh Rob Holmes says,
1:12:36
"Very good setup." Um, very good setup. We've got an MVHR currently too, but it's shared with
1:12:42
house. Printers are getting their own building soon with a dedicated MVHR extracting direct from printers. Cheers.
1:12:48
No worries. MVHR like I didn't install my own, but they're bloody expensive, aren't they? So, yeah. So, yeah. Watch
1:12:55
it before $100 on sale in three years. Yeah. Exactly. Exactly. You're You're not wrong, guys. you're not wrong. Like
1:13:02
don't don't think any Cuba are losing out at 449. They're still making money when selling it at 449, just not as
1:13:09
much. It's all about driving hype. It's all about driving numbers. Um but again,
1:13:14
I would like this channel. I I want people to pre-order it. Um I haven't I I
1:13:19
think we'll all agree I have not broken my NDA here, have I? Yeah. Um let's
1:13:25
let's let's have a vote. Uh have I said anything? Uh, not Q&A.
1:13:30
Why would I want a Q&A? I'm busy. Uh, start a poll. Why not? Um, uh, have I
1:13:37
broken my NDA? I just want a universal no. Yes. No. And don't be a dick about
1:13:43
it. I haven't said anything or revealed anything that isn't public on this
1:13:49
website. So, there we go. Just some some way to interact. Yeah. 100% no.
1:13:54
Brilliant. So, but uh yeah, so that sort of thing.
1:14:01
I just want to make sure people are buying aware, not be aware. Um the
1:14:06
machine, as I said at Form Next, has potential. Just please don't don't be
1:14:11
don't be disappointed. You're not getting $350 off. Um you don't know about my NDA rules.
1:14:17
Basically, I'm not allowed to talk about the printer before the NDA date. That's that's pretty much I'm not allowed to
1:14:23
disclose anything about the printer. um until the date they choose, but they
1:14:30
h No, my mic output is a bit low. Um I don't know why today. Let me turn it up
1:14:35
a little. Sorry for anyone who thinks it's higher. Uh oh, that I couldn't go up any higher.
1:14:42
I've moved it 0.1 dibels up. Um but
1:14:48
yeah, don't just don't expect this. The exclusive gift will probably it it might
1:14:53
be interesting. It it might be it might be an add-on for the printer. It'll be it'll be somewhat
1:14:59
cheap. Um sorry guys, my my mic's at maximum. I I literally cannot boost it
1:15:04
more. If I boost it more then you're I'm going to go tiny. So
1:15:11
it's because I'm like I'm that far away from it which is quite a quite a distance. I can't get closer if I if I
1:15:17
do that. I'm I'm over here. So that that's gonna sound a lot better.
1:15:23
But yeah, so
1:15:29
but yeah, anyway, um that's it. So yeah, know what know what you're getting. Um
1:15:34
these guys are still That's fine. Yeah, Lex Chris, don't worry if you've just joined Lex Chris. I I've said pre-order
1:15:41
it. Definitely pre-order it. If you're going to pre-order it as well, please use my affiliate link because then I earn a commission. Um, all I'm all I'm
1:15:49
really expressing is you're not getting $350 off.
1:15:55
It's never I I don't I don't believe it's ever going to be that price. The the RRP
1:16:01
um maybe for 27 seconds. Um if this if this was launched in the UK, like I'm surprised people in the UK haven't
1:16:08
reported these because since they're selling into the UK um reporting these guys to trading standards um or
1:16:14
something like that. I'm not doing it. I haven't got time and I don't truly know, excuse me, I
1:16:21
don't truly know whether or not they should be.
1:16:26
I just don't like it. It's It's shitty. So,
1:16:33
um yeah, the No, I sorted that out. So, yeah. So, um just for full disclosure, so um yeah, I obviously make commissions
1:16:40
on pre-orders. So there was a uh argument that I mentioned on my live stream and I had this argument with with
1:16:47
um any cubic because the way like my comm and I run this channel off off commissions Havoc 3D the TLDDR is uh
1:16:56
you're not getting 350 off just just be aware of that but yes it's worth a $10 punt to to pre-order it. Um so yeah so
1:17:04
the way my commissions work is on a sale I make a percentage of the sale. Um I I
1:17:10
don't talk about what percentage I earn from different brands and that the reason why is because different brands
1:17:16
not all of them um have different tiers and when you work hard you can negotiate
1:17:22
a a higher rate and then talking about what they all offer would be uh both
1:17:28
disrespective to other brands but also other creators who maybe aren't in the same position as I am who are getting
1:17:33
less and um that's a bit crap. I know it sounds shady as [ __ ] Um, some companies
1:17:40
don't like you talking about it's part of the NDA. Um, I'll quite happily have the conversation around that and give
1:17:46
you as much full disclosure as I'm willing to. I don't want to hide things from you. But again, if people think
1:17:52
this is making me rich, please go outside and have a look at the 14, no,
1:17:57
16year-old Honda CRV I drive that that cost me 1,600 quid. I'm not driving
1:18:03
around in a Tesla. I don't live in a mansion. I work out of a garage. I don't have a studio. Like I I've got kids.
1:18:11
That's it. I I'm a normal man who enjoys a holiday once a year with my family and
1:18:18
works 24/7. That that's how I operate. So that's my full disclosure. Um, but
1:18:24
the diff the reason why I'm bringing this up for any cubic is so any cubic because they launched this basically
1:18:30
said, "Yep, uh, every time someone pre-orders using your link, you make I make my percentage off the pre-order
1:18:38
amount. Uh, not the uh not the full sale. If if so that that would take like
1:18:48
20 let's say $20 down to like 40 cents per that should Yeah, exactly. It is my
1:18:56
business. But other creators have gone out there. Um some of them have done it in in smart ways. Some of them have been
1:19:02
utter [ __ ] and just want to attack and and uh and incite a mob to come and
1:19:07
[ __ ] on those of us who don't. But yeah, you're right. It's my money. um you know
1:19:12
I and and how I how I operate and how I earn my money respectfully isn't
1:19:18
anybody's business the the same way it's like you know what if I turn around to
1:19:24
Yeah. If I turn around to someone and went okay how much do you earn? It's one of the rudest [ __ ] questions in the world. I don't like to talk about it
1:19:31
because I there are people who are much better off in the world than me. There are people who are much worse off in the
1:19:36
world than me. Um, I'm not the same reason I'm not going to [ __ ] on anyone because the best printer for them is an
1:19:42
any cubic mono M7 because that's the most they can afford and they've had to save up to do it. That is Yeah, that is
1:19:49
absolutely shitty and horrible. People have different circumstances and I would
1:19:55
rather support somebody's circumstances than [ __ ] on somebody because they've
1:20:00
worked hard and done well and done that sort of thing. And if if that's not your view and that's not who you want to be and you want that for drama and clicks
1:20:07
and and like you've said wire ahead controversy clicks drama it generates clicks at the end of the day I've been
1:20:13
around long enough I'm old enough and ugly enough to have built up enough of a following that you know I'm being
1:20:19
straight with you. I am being straight with you what I think about these machines. My favorite reviews are ones
1:20:24
where I'm like I don't like this but people have gone well I do. You've shown me at least what I'm getting myself in for and I'm going to get that one. And
1:20:30
I'm like brilliant. Okay, fantastic. But yeah, so um but yeah, any cubic had
1:20:36
set this up that basically um in order for me to earn a commission off these pre-orders,
1:20:41
um I need you to pre-order it, but then I need you to come before you before you
1:20:48
go on Kickstarter and and make your payment. um you need to come back to my
1:20:54
video and then click the link to kick booster which I still haven't had and then and then click it again before
1:21:00
before I make a full commission on the sale. So yeah um that's it. But yeah, my whole point
1:21:06
is to I know I've been doing lasers and stuff. My my focus is resin printers. These come first on my channel. Um but
1:21:12
again it's YouTube. I've got to cover content to stay relevant and do that the and I'm having fun with lasers. They are
1:21:18
fun. Uh, I still haven't managed to unbox my uh F2 Ultra UV, but I'm so
1:21:25
excited to play with that.
1:21:31
Uh, RUP, I don't know. It gets difficult when your opinion clashes with the opinion of the company that's paying
1:21:37
you. Um, in in what regard? Like I because I do that all the time because
1:21:42
the company that's paying me um is I
1:21:47
hope is mature enough to accept fair and critical feedback. The second I have a company say we're not going to work with
1:21:53
you because you're too honest. Uh I'll do a video that says I've refused this
1:21:58
product because the company said um they've refused to work with me. Because those emails aren't covered under NDA.
1:22:04
So as soon as somebody goes, "Yep, okay, we're not we're not going to we don't want you to do this. we refuse to do
1:22:10
that or in any way threatens me um that says like, "Oh, we we'll hold back your
1:22:17
earnings or we'll never work with you again." I will publish that video to
1:22:22
say, "Here's what they sent me. Here is my reply. Is this a company you want to trust?" I will I will absolutely do
1:22:30
that. I do struggle with this because being at form next and meeting these
1:22:36
people who let's be fair I [ __ ] on a lot of
1:22:41
printers and I think I do it in an entertaining way but sometimes it's a
1:22:46
bit lost in translation and maybe they don't take it as entertaining they just take it as [ __ ] on a printer. It is
1:22:53
sometimes difficult to look at these people face to face and and say the things that I think about their
1:22:59
machines. It's a lot harder to do it then than when I'm just sat in my room
1:23:05
talking to you guys uh on a microphone. So yeah. Uh Demon Prince says, "Slightly
1:23:11
asideing the topic, have I heard about the Honey add-on taking affiliations sales from creators?" Yeah, I've heard
1:23:17
about it and here I am saying I've got the I've got the Honey um plugin right
1:23:23
here on my screen. Um yeah, there's nothing I can do about it.
1:23:29
Yeah, speaking the truth with a bit of snark is what we like. It's what I love doing. But yeah,
1:23:36
um yeah, there's nothing I can do about it. And I've I've got another one as well. I've got Coopert,
1:23:42
which sometimes appears. Uh let's have a look.
1:23:48
But yeah, sometimes they insert their own like when someone goes to a checkout
1:23:53
um they insert who Honey inserts their own affiliate link which takes from mind
1:23:58
which Yeah. Yeah. Honey um I think like
1:24:04
creators like us only get I think a small percentage. It's like less than
1:24:09
20% um of the C like so all of us. So like
1:24:15
me, Uncle Jesse, um 3D printing nerd, Rising Ape, Greedy
1:24:24
3D, Ground Affected, Battle Brother Sam, all of all of us are only worth like 20%
1:24:32
of the entire affiliate marketing
1:24:38
uh bubble for these companies. So yeah,
1:24:47
I would love to get YouTube certified in how to make my own Invisalign. Okay, my kid needs braces, but I'll just take the
1:24:54
hit on the wallet for now. Yeah. Um I like that's the bit I'd be terrified to take any of these resins and put it in
1:25:00
someone's mouth. So no, he's not bought and paid for by
1:25:05
Eligu. Look, he's Uncle Jesse gets a lot of [ __ ] but he's really entertaining and he's a very nice
1:25:12
guy. And the way he operates is the way he chooses to operate, which I don't I
1:25:18
don't I don't beholden, what's the word? I I
1:25:25
won't [ __ ] on any creator for how they choose to operate unless the way they
1:25:31
choose to operate is purely ragebait reactionary content.
1:25:38
But yeah. Yeah, keep Jesse away from glass though. Yeah, you're right. Or make your glass Jesse proof. So, oh,
1:25:44
apparently I have broken my NDA according to 6% of the audience. So, someone's just being a dick. Um, but
1:25:52
yeah, so like the way people choose to promote, I think probably my favorite of
1:25:58
everyone is Joel. Like Joel Joel has that good way of he doesn't sell. He
1:26:04
doesn't get over excited. Joel is 3D printing nerd by the way. Um,
1:26:09
and I it's just very balanced. Really good.
1:26:15
Really balanced. I really like Frank as well. He does Frankly Built. he does his stuff uh where it's, you know, it's off
1:26:21
the back of building Iron Man costumes, but he's got the experience to share share his view. I think I'm the I'm the
1:26:29
pessimist and and in a way kind of like um Vogman.
1:26:35
Vogman's another one of my favorites. Like I I use I don't always agree with Vogman, but I use Vogman to um as kind
1:26:43
of like a litmus test. And I felt really shitty about when everyone [ __ ] on me
1:26:49
for my opinion of the Haggi's reflex the RS last year and then his video came out and I was like, "Thank you. You get it.
1:26:57
You get it." And and we do that. Um but yeah, Jesse is a Jesse is is a very
1:27:04
typical Oh, wow. This is cool. And just fun. So he's not bought and paid for by Eligu. He's not there crapping on other
1:27:11
brands. He's he's sharing. If you go and look at his stuff like his he's got
1:27:16
sponsored by Eligu on a lot of his videos and he's very clear about that and he shows you hey this is a video
1:27:22
about an Elgu product and this is sponsored by Eligu like okay some people
1:27:27
don't understand what that means but at the same time
1:27:33
he is doing the right thing he's fun he's entertaining I can't I can't critique him at all there are creators
1:27:40
out there who've gone yeah do do you know that people are misleading you. Well, honestly guys, if you think at
1:27:47
this point I'm misleading you, um you're either not paying attention, you've heard it from somebody else and and
1:27:53
haven't had a good experience with me, um and there's nothing I can do to change it. I'm telling you what I think.
1:28:00
So, if you think that, you can you can bollocks. I'm not um I I tell you what I
1:28:08
think. I keep my fingers crossed that you get the right printer for you and
1:28:15
then you'll come back next time. And I've now got people coming back. I've now got people coming back going, "You
1:28:20
you told me what uh to get last time. I trusted your opinion. I was really happy
1:28:26
with this machine. It's time to upgrade. What do you recommend?" And that this is my payoff. Hearing that is my payoff for
1:28:33
running this channel. Uh I think that's everything that came to me. keep Jesse away from glass fronts. Just felt like
1:28:39
he glossed her over a lot of the flaws of the uh Neptune Formax. Again, Jesse
1:28:45
isn't about the flaws. Jesse is very much here's the thing. Um I think the
1:28:52
the N the Eligu sponsorship um it probably does have an impact, but he
1:28:58
shares it. Um he's open about it. when he does when he does Elgu videos, he's
1:29:04
very much here's the thing. When he does other machines, because he doesn't have that sponsorship, it's it's more
1:29:10
critical. There is a bit of disjointedness about how the how the model works, but but I
1:29:18
can't it's not him. It it's how it it's how it works. Um, and again, don't just
1:29:23
watch my reviews. Watch three or four reviews before you buy a product, but
1:29:28
click my links. Um, yeah, Frank from Frankly Built does great stuff and he's a great guy. Uh, I like the P1 name.
1:29:35
Feels like quality budget machine already because of the Bamboo P1 series. Good advertising strategy. Yeah, it is.
1:29:41
It's is a very good advertising strategy. Um, Nico from Concepts 3D, maker of the Athena 2 says, "It's 4 a.m.
1:29:48
No idea why I'm up, but here I am. What did I miss?" Uh, what you miss, Nico, is a company doing the exact opposite of
1:29:55
what your company does and they delivering FOMO marketing, promising
1:30:00
$350 off uh with a $10. Now, it's still probably worth that $10, but you're not
1:30:06
getting $350 off um probably 50. And and this isn't we're not inferring this from
1:30:11
any Cubic. We're inferring this from every other [ __ ] brand who's done this same model. So yes, if you're
1:30:18
interested in the machine, you've you've got very little to nothing to lose with this $10 $10 pre-order. You can even end
1:30:25
up up. So definitely do it. Just do it knowing that this is bollocks.
1:30:32
There you go. And I think that's a good recap for anyone who came to the end of the video and wanted to know what this
1:30:38
was about and get the TLDDR. So that's it. I hope that helps. Um, and if
1:30:45
anybody uh if anybody has got any questions or sorry uh anyone's got any questions
1:30:51
after this, drop them down in the comments because I think this is the end. I said we were about an hour in. I think we're nearing two, an hour and a
1:30:58
half. So, this is longer than I wanted it to be. Um, I might have another live stream tomorrow. There was another topic
1:31:05
I wanted to talk about. It was something I did on Black Friday. Uh, but I'm quite enjoying these live streams in the day
1:31:11
when I get them set up and when I've got time to do them. Um, and tomorrow I think will be a good one to talk about
1:31:18
what I've already talked about and many of you have seen. Uh, I would like to talk about maybe tomorrow is
1:31:27
I think that's what it is. Nope. Yes.
1:31:34
No. What is it? Soul something. Soul uh
1:31:40
my mini factory soul
1:31:46
slicer. No, that it's not soul slicer. My mini factory slicer. My mini factory
1:31:55
slicer. Soulcrafted. That's it. Soulcrafted. Thanks, Nico. Um yeah. Oh, look. They've
1:32:03
made 108. They made 9,000. So again, not something worth backing,
1:32:10
but but if you Here's the thing. They they've earned 108,000. Let me see if
1:32:17
they've done that. Uh 10. Yeah. So they they are clear. They have
1:32:23
said it. So I was probably a bit shitty the other day. I don't need Okay, it's not the first thing in there. So,
1:32:28
they've put in the first 100k, but I'm just like, they've been clear
1:32:35
about it. Good. Um, I didn't check that the other day, but so they've made 9,000
1:32:43
and no offense, but 109,000 is not going to pay for a slicer. I I don't know.
1:32:51
Is that Is that a topic we should I think it'll be a clickable video so we can talk about it. Maybe I do that
1:32:57
tomorrow. or maybe I do it Thursday. Don't forget to come back later today at 5:15 p.m. UK time or your local time to
1:33:04
watch today's video, which is about a laser, but it's a really, really good laser. It's a UV laser, and I was able
1:33:10
to laser miniatures, and I'll show you how to laser. Hang on, sorry if you've
1:33:16
got gut on there. I'm going to show you how to laser crystals. So, that is a miniature lasers in lasered inside a
1:33:23
crystal, and it's a laser that can do that. So definitely check out today's
1:33:29
video mainly because I need the views. I know you're getting sick of me this week. I do have a video every single day
1:33:35
this week. There we go. So, yep. As a recap, if you
1:33:41
came in at the end, this is about uh $10 deposit for $350 off. The TLDDR
1:33:49
is Yeah, definitely definitely get the deposit. You've got
1:33:54
nothing to lose. And actually, no matter what, you'll potentially gave gain $5.
1:34:00
If if you decide not to do anything, just just do it with PayPal. And I bet you can complain and get your $10 back
1:34:05
if you really care. It's $10. It doesn't matter. Um, but you're not going to get $350 off. The exclusive gift is probably
1:34:13
crap. Priority global shipping is is you your machine's probably going to ship
1:34:19
from China the same time as a crate full of others, including local warehouse stock. And it's a Kickstarter, guys. So,
1:34:27
expect expect expect disappointment and be happy if it's better. So, expect
1:34:34
that they're not going to ship in February or if they do, there'll be a delay. Expect that the further you are
1:34:39
in the world from China, the longer you're going to have to wait. And also, expect that
1:34:47
I'll be here next time. I forgot I had something else lined up. But that's it. Thanks very much for joining. I think
1:34:53
we've had a good few hundred people. We've had some donations. Um, we are 6%
1:34:59
of the way to our $100 goal for the month. Uh, which is a thing. I don't
1:35:04
know if I should start doing these more often or whether I'm just boring. But yeah, thanks very much. Hope for the
1:35:09
best. Prepare for the worst. That's it. No, not for that. Expect the worst. Hope for the best. There's got to be one.
1:35:18
But yeah, but but do it. And if you're going to do it, click my affiliate link
1:35:23
so I at least make a commission on the $10. It all every little helps. So, but yeah,
1:35:31
thank you. Um I we've just done a re recap uh Dalica Gaming.
1:35:37
So, yeah, thanks everyone. Until next time, which is later today. Please
1:35:43
watch.
#Product Reviews & Price Comparisons
#Marketing